Demograf Audio Zeus — subwoofer, pair with wooden cabinets and large drivers, low angle

Zeus

from $18,100 Made to order

Request a build slot Deposit, lead time and warranty

All units in the photos are real. Some photos are AI-enhanced to improve image quality.

Demograf Audio Zeus — subwoofer, front with large driver, cd player on top

The lowest octaves

Body and weight

It adds body and weight to the lowest octaves without blurring the midrange your main loudspeakers already reproduce well.

Demograf Audio Zeus — subwoofer, rear panel with ventilation holes and cable terminals, from above

Music

Organ, orchestra, bass guitar

Bass guitar, kick drum and pipe organ gain scale and physical presence; orchestral and film recordings recover the floor they were mixed with.

Demograf Audio Zeus — subwoofer, front with driver beside a tube amplifier and power gear

Passive or active

An amplifier matched from the start

Each Zeus is built either passive, driven from your amplifier, or active, with a dedicated Class A or Class D amplifier fitted inside the cabinet.

Demograf Audio Zeus — subwoofer, cabinet with grille on, top-down view of wood grain

Made to order

Assembled by hand

A matched woofer, natural acoustic felt, internal wiring and cabinet bracing, assembled by hand; an acoustic resistance panel makes placement in the room far less critical.

Demograf Audio Zeus — subwoofer, cabinet with black grille in the corner by curtains

Zeus

Numbered unit — Opus No. on the nameplate

from $18,100

Made to order

Model
Hand-built high-end subwoofer with a 15-inch field-coil driver, 10–300 Hz — passive or active
In brief
A compact, hand-built subwoofer around a 15-inch woofer with a field-coil motor wound by Demograf Audio.
Queue deposit
50% · from $9,060
Lead time
Seven pieces of gear a year, each built by hand to order. Current lead time: six months or more.
Origin
Made in Kazakhstan by Dmitriy Gubchenko
Warranty
1 year (extra warranty available: +1 or +2 years)

Music it suits
Pipe organ · symphonic · jazz and rock bass lines · film scores

From the atelier

The Zeus ‘thunder’ subwoofers

Every model in the Zeus series is what the atelier calls a thunder subwoofer: a compact, hand-built enclosure around a 15-inch woofer with a field-coil (electromagnet) motor wound by Demograf Audio. It adds body and weight to the lowest octaves without blurring the midrange your main loudspeakers already reproduce well.

What it brings to a system

Bass guitar, kick drum and pipe organ gain scale and physical presence; orchestral and film recordings recover the floor they were mixed with. Zeus is a natural partner for high-sensitivity full-range and single-driver loudspeakers driven by low-power tube amplifiers, which rarely reach below 40 Hz on their own.

Passive or active

Each Zeus is built either passive — driven from your amplifier through the speaker terminals — or active, with a dedicated Class A or Class D amplifier fitted inside the cabinet, so the amplifier is matched to the woofer from the start.

Demograf Audio Zeus — subwoofer, pair front-on with large drivers, grilles off

Inside the cabinet

Each subwoofer is assembled by hand: a matched woofer, natural acoustic felt, terminals, internal wiring and cabinet bracing — plus the amplifier module in active versions. The standard driver is a Demograf Audio 15-inch woofer on a field-coil motor; other drivers can be fitted to tune the low end to your taste.

Enclosure options

  • Acoustic resistance panel (aperiodic) as standard — makes placement in the room far less critical
  • Open baffle, sealed box, transmission line (labyrinth) or bass reflex on request
  • Compact 450 × 450 × 450 mm cabinet with extensive low-frequency adjustment

Component Manufacturer Country of origin
Woofer 15″, field-coil (electromagnet) motor Demograf Audio Own manufacture
Active amplifier module Class A / Class D (option) Demograf Audio Own manufacture
Internal wiring: Proprietary “RareCoreFusion” Alloy Demograf Audio Own manufacture
Damping Natural acoustic felt —

INPUTRCA / terminalsAMPLIFIERPassive / Class A / DWOOFER15″ field-coilENCLOSUREAperiodic panelINPUTRCA / terminalsAMPLIFIERPassive / Class A / DWOOFER15″ field-coilENCLOSUREAperiodic panel

Simplified diagram of the stock configuration. The exact circuit for your options is confirmed with the atelier.

Specification

Download the brochure PDF · EN · 0.8 MB

Measured on the stock configuration; options may change the figures.

Type
Subwoofer, passive or active (Class A / Class D amplifier optional)
Frequency response
10 Hz – 300 Hz
Woofer
15″ (larger on request), field-coil (electromagnet) motor, Demograf Audio
Placement
Floor-standing
Acoustic design
Acoustic resistance panel (aperiodic) as standard; open baffle, sealed box, transmission line or bass reflex on request
Inputs
RCA / speaker binding posts
Input impedance
10 kΩ
Internal wiring
Proprietary “RareCoreFusion” Alloy wire
Mains
100 / 120 / 230 V — set at order time, plug to match (NEMA, Schuko, BS 1363 / type G)
Weight
From 12 kg
Dimensions (W × H × D)
450 × 450 × 450 mm

Custom options

Stock items are included in the price. Every option is agreed with the atelier before the build starts.

Components

  • Passive subwoofer — 15″ Demograf Audio field-coil woofer Stock
  • Choice of woofer — alternative drivers to tune the bass to your taste
  • Built-in Class A amplifier (active version)
  • Built-in Class D amplifier (active version)

Finish

  • Standard cabinet Stock
  • Precious hardwoods and veneers
  • Remote control with functions to your specification

Regional version

  • 230 V — Schuko plug (Europe) Stock
  • 120 V — NEMA plug (North America)
  • 100 V — NEMA plug (Japan)
  • 230 V — BS 1363 / type G plug (UK · Middle East)

Does the Zeus use tubes?

Zeus has no tubes. The passive version is driven by any amplifier through its speaker terminals, and its field-coil magnets are energised from the mains; the active version carries its own Class A or Class D amplifier and connects via RCA or speaker-level inputs (10 kΩ).

How is the Zeus serviced?

Loudspeakers need no routine service. Drivers, crossovers and terminals are repaired by the atelier for as long as parts exist.

How is it delivered?

Shipping and insurance are paid by the buyer and shown as a separate line in your quotation. Every unit is packed for long-distance transport in heavy-duty flight cases and a wooden crate.

Which mains voltage and plug?

Each piece of gear is built for 100 V, 120 V or 230 V mains with the matching plug (NEMA, Schuko or BS 1363 / type G). The voltage is fixed at order time, so tell us where the unit will be used.

How long does the Zeus take to build?

Build time is six months or more from the queue deposit, depending on the configuration and the queue; delivery takes from one month after completion. The atelier builds seven instruments a year. A priority build is available for an extra 50% of the price: your unit is moved ahead in the build queue.

* Photos are taken from real systems and show the specific configuration of a particular customer; your unit can look the way you want — all our equipment is fully customisable.